Door Glass

DOOR GLASS

REMOVAL

1. Lower the window glass.
2. Remove the trim panel.
3. Remove the waterdam.
4. Remove inner and outer beltline weatherstrip.
5. Remove the window weatherstrip from the door.

Fig. 2:

6. Remove the division bar/stationary glass (Fig. 2).
7. Remove the window glass screw, bushing and retainer from the regulator.
8. Remove the window glass from door.

INSTALLATION

1. Install the glass in the door, and install the retainer, bushing and screw.
2. Tighten the glass attaching screw 6 N.m (53 in.lbs) torque.
3. Install the division bar/stationary glass in the door.
4. Install the glass run channel weatherstrip.
5. Install the inner and outer beltline weatherstrip.
6. Install the waterdam.
7. Install the trim panel.