Trunk / Liftgate Latch: Service and Repair

LATCH

REMOVAL

1. Raise liftgate.
2. Remove liftgate trim panel.

Fig. 4:

3. Remove screws attaching latch to liftgate (Fig.4).
4. Disconnect rod from latch.
5. Disconnect power lock connector from handle, if equipped.
6. Remove latch from liftgate.

INSTALLATION

1. Position latch in liftgate.
2. Connect power lock connector to handle, if equipped.
3. Connect latch rod.
4. Install screws attaching latch to liftgate. Tighten screws to 13 N.m (9 ft.lbs.) torque.
5. Install liftgate trim panel.