Door Lock Cylinder: Service and Repair
LOCK CYLINDERREMOVAL
1. Remove the door trim panel.
2. Peel back waterdam to access lock cylinder.
Fig. 8:
3. Disconnect the door latch-to-lock cylinder rod at the door latch (Fig. 8).
4. Remove the lock cylinder retainer clip.
5. Remove the lock cylinder.
6. If applicable, remove the door latch-to-lock cylinder rod from the original lock cylinder. Connect it to the replacement lock cylinder.
INSTALLATION
1. Position the lock cylinder and in the door opening.
2. Install the retainer clip.
3. Connect the door latch-to-lock cylinder rod to the door latch.
4. Press the waterdam into position.
5. Install the door trim panel.