Operation CHARM: Car repair manuals for everyone.
Home >> Jeep >> 2000 >> Cherokee 4WD L4-2.5L VIN P >> Repair and Diagnosis >> Lighting and Horns >> Horn >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Horn: Service and Repair

REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Raise and support the vehicle.
3. Remove the front underbody splash shield.

NOTE: Remove the horn and its mounting bracket from the vehicle as a unit. Do not remove the horn from its mounting bracket.

Horns Remove/Install:




4. Remove the screw that secures the horn and mounting bracket unit to the radiator closure panel brace.
5. Lower the horn and mounting bracket unit far enough to access and disconnect the wire harness connector from the horn connector receptacle.
6. Remove the horn and mounting bracket unit from behind the front bumper.

INSTALLATION
1. Position the horn and mounting bracket unit behind the front bumper.
2. Reconnect the wire harness connector to the horn connector receptacle.
3. Position the horn and mounting bracket unit to the radiator closure panel brace.
4. Install and tighten the screw that secures the horn and mounting bracket unit to the radiator do sure panel brace. Tighten the screw to 28.5 Nm (21 ft. lbs.).
5. Install the front underbody splash shield.
6. Lower the vehicle.
7. Reconnect the battery negative cable.
pro multis · About Operation CHARM