Operation CHARM: Car repair manuals for everyone.
Home >> Jeep >> 2000 >> Cherokee 4WD L6-4.0L VIN S >> Repair and Diagnosis >> Body and Frame >> Seats >> Seat Temperature Relay >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Seat Temperature Relay: Service and Repair

REMOVAL AND INSTALLATION
1. Move the right power seat adjuster to its full up and full rear stop positions.
2. Disconnect and isolate the battery negative cable.
3. Unhook the seat cushion cover retainer from the seat cushion frame and pull back the seat cushion cover.
4. Pull back the seat cushion to allow access to the Heated Seat Relay.

Heated Seat Relay Remove/Install:




5. Cut the Christmas tree fastener to remove the Heated Seat Relay fastener from the mounting bracket. Unplug the wire harness connector from the relay.
6. Reverse the removal procedures to install. A new Christmas tree fastener must be used to mount the relay. Be certain that the relay terminals are aligned with the cavities in the wire harness connector before pushing the relay firmly into place.
pro multis · About Operation CHARM