Reading and Courtesy Lamp Bulb Replacement

REMOVAL AND INSTALLATION
1. Disconnect and isolate the battery negative cable.
2. Insert a long, narrow, flat-bladed tool in the notch on the edge of the reading and courtesy lamp Tens.
3. Gently pry the lens downward from the overhead console housing and pivot the lens down. It may be necessary to move the tool along the edge of the lens to free the lens from the console housing.
4. Unsnap the bulb from the bulb holders by pulling the bulb gently downwards.
5. Install a new bulb by aligning its base with the bulb holders and pushing he bulb firmly into place.
6. Pivot the lens back up into position and press upward firmly until it snaps into place.
7. Connect the battery negative cable.
8. Test the lamp by depressing the lens to check for proper lamp switching and lighting.