Operation CHARM: Car repair manuals for everyone.
Home >> Jeep >> 2009 >> Commander 2WD V6-3.7L >> Repair and Diagnosis >> Body and Frame >> Doors, Hood and Trunk >> Trunk / Liftgate >> Trunk / Liftgate Latch >> Service and Repair >> Latch - Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Latch - Installation






INSTALLATION





1. Position the latch (1) onto the inside of the liftgate.
2. Install and tighten the three bolts (2) that secure the latch (1) to the studs on the inside of the liftgate.
3. Tighten the bolts to 12 Nm (9 ft. lbs.).





4. Connect the latch release cable to the handle and seat the support clips.
5. Connect electrical connectors (2) to the latch (1).





6. Position the watershield back.
7. Install the trim panel. Liftgate Trim Panel - Installation
8. Connect the battery negative cable.

pro multis · About Operation CHARM