Power Liftgate Drive Unit Motor - Removal

REMOVAL





1. Open the liftgate.
2. Disconnect and isolate the battery negative cable.
3. Remove the power liftgate drive unit assembly from the vehicle, Power Liftgate Drive Unit - Removal.

CAUTION: Mark the position of the two full open switch wire terminals (2) in relation to their location in the liftgate drive unit wire connector (1).

4. Using an appropriate wire terminal tool, carefully remove the full open switch wire terminals (2) from the liftgate drive unit connector (1).





5. Remove the three motor retaining screws (3) and remove the motor (1) from the drive unit assembly (2).