Second Row

REMOVAL





1. Disconnect and isolate the battery negative cable.
2. Using a trim stick (special tool # C-4755) or equivalent, gently pry the upper edge of the floor console rear trim panel (1) to release the retaining clips at all of the locations around the floor console rear trim panel (3).
3. Lift up and rearward to release the panel lower tabs (2) from the floor console.





4. If equipped, disconnect the 2nd row heated seat switches (1), 115 Volt power outlet (3) and the auxiliary audio jacks (2) electrical connectors from the floor console rear trim panel.
5. Using a trim stick (special tool # C-4755) or equivalent, gently pry the 2nd row heated seat switch assembly out of the trim panel.