Operation CHARM: Car repair manuals for everyone.
Home >> Jeep >> 2009 >> Commander 2WD V6-3.7L >> Repair and Diagnosis >> Lighting and Horns >> Headlamp >> Headlamp Bulb >> Service and Repair >> Front Lamp Unit Boot - Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Front Lamp Unit Boot - Installation






BOOT - HEADLAMP BULB

CAUTION: Do not contaminate the bulb glass by touching it with your fingers or by allowing it to contact other oily surfaces. Shortened bulb life will result.





1. Position the low beam (upper) or high beam (lower) boot (2) to the back of the front lamp unit housing.
2. Push the inner circumference of the boot down and around the bulb collar formation on the back of the lamp reflector as necessary to fully engage the boot to the reflector.
3. Push the outer circumference of the boot down and around the boot collar formation on the back of the lamp housing as necessary to fully engage the boot to the housing.
4. Reinstall the low or high beam headlamp bulb into the front lamp unit. Front Lamp Unit Boot - Installation.
5. Reinstall the front lamp unit onto the front of the vehicle. Front Lamp Unit Boot - Installation.

pro multis · About Operation CHARM