Operation CHARM: Car repair manuals for everyone.
Home >> Jeep >> 2009 >> Commander 2WD V6-3.7L >> Repair and Diagnosis >> Maintenance >> Wheels and Tires >> Wheel Hub >> Service and Repair >> Front Hub and Bearing - Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Front Hub and Bearing - Installation






INSTALLATION





1. Install the hub bearing (3) to the knuckle then tighten the 3 bolts to 115 Nm (85 ft. lbs.).
2. Install the wheel speed sensor (1) into the hub (3) and then install the mounting bolt (2) and tighten to 12-14 Nm (106-124 in. lbs.). Front.










3. Install the brake rotor (1) Brake Rotor - Installation.










4. Install the brake caliper adaptor (1) Disc Brake Caliper Adapter - Installation.





5. Install the caliper (1) Disc Brake Caliper - Installation.

6. Install the wheel and tire assembly Procedures.
7. Remove the support and lower the vehicle.
pro multis · About Operation CHARM