Operation CHARM: Car repair manuals for everyone.
Home >> Jeep >> 2009 >> Commander 2WD V6-3.7L >> Repair and Diagnosis >> Transmission and Drivetrain >> Differential Assembly >> Service and Repair >> Overhaul >> Differential Carrier - Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Differential Carrier - Installation






INSTALLATION





1. Apply a coat of hypoid gear lubricant to differential bearings, bearing cups and threaded adjusters.

NOTE: Grease can be used to keep the adjusters in position.

2. Install differential assembly into the housing.
3. Install differential bearing caps in their original locations.
4. Install bearing cap bolts and tighten upper bolts to 14 Nm (10 ft. lbs.). Tighten lower bolts finger-tight until the bolt head is seated.
5. Perform differential bearing preload and adjustment procedure.
6. Tighten bearing cap bolts (2) to 136 Nm (100 ft. lbs).
7. Install adjuster locks (3) on bearing caps and tighten bolts to 11 Nm (8 ft. lbs.).
8. Install axle shafts.
9. Install differential cover.

pro multis · About Operation CHARM