Front

REMOVAL

NOTE: Before proceeding, Technician Safety Information Vehicle Damage Warnings .

1. Raise and support the vehicle. Service and Repair

NOTE: Perform 2 through 5 on each side of the vehicle to complete pad set removal.





2. Remove the wheel mounting nuts (3), then the tire and wheel assembly (1).






NOTE: When removing the caliper guide pin bolts (2, 3) note that one (upper) has a special sleeve on the end. It important that his bolt be installed in the upper mounting hole when the caliper is installed.

3. Remove the two brake caliper guide pin bolts (2, 3).
4. Remove the disc brake caliper (4) from the disc brake adapter bracket (1) and hang it out of the way using wire or a bungee cord. Use care not to overextend the brake hose when doing this.





5. Remove the brake pads (4, 5) from the caliper adapter bracket (2).