Engine Torque Specifications

TORQUE






CYLINDER HEAD TORQUE





Step 1: Tighten bolts 1-8 27 Nm (20 ft. lbs.).
Step 2: Verify that bolts 1-8, all reached 27 Nm (20 ft. lbs.), by repeating step 1 without loosening the bolts. Tighten bolts 9 thru 12 14 Nm (10 ft. lbs.).
Step 3: Tighten bolts 1-8 90 °.
Step 4: Tighten bolts 1-8 90 °, again. Tighten bolts 9-12, 26 Nm (19 ft. lbs.)

HEAD BOLT REUSE/REPLACE





The cylinder head bolts must be examined BEFORE reuse. If the threads are necked down (2) the bolts should be replaced.

INTAKE MANIFOLD






CAMSHAFT BEARING CAP






MAIN BEARING CAP Torque





Hand tighten bolts 1D,1G and 1F until the bedplate contacts the block.
Tighten bolts 1A - 1J 54 Nm (40 ft. lbs.)
Tighten bolts 1 - 8 7 Nm (62 in. lbs.)
Turn bolts 1 - 8 an additional 90°.
Tighten bolts A - E 27 Nm ( 20 ft. lbs.).


FLEX PLATE






OIL PUMP






EXHAUST MANIFOLD

Start at the center arm and work outward.


WATER PUMP