Operation CHARM: Car repair manuals for everyone.
Home >> Jeep >> 2010 >> Commander 2WD V6-3.7L >> Repair and Diagnosis >> Brakes and Traction Control >> Parking Brake System >> Parking Brake Cable >> Service and Repair >> Installation >> Front Cable
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Front Cable






FRONT










1. Install the front cable (3) at the hand lever mounting bracket (1).
2. Install the front cable (3) at the hand lever (1).
3. Install the front cable at the rear floor bracket.
4. Install the 2 front cable routing clamps and the 3 nuts (2AND4).










5. Install the front cable (2) at the equalizer (1).










6. Unlock the front park brake cable (1).

7. Install the rear carpet back in place.









8. Install the module bracket (2) mounting nuts.
9. Reconnect the module electrical connectors (1).

10. Install the rear sill plates.









11. Install the drivers seat . Service and Repair





12. Install the left B-pillar trim panel B-Pillar Trim Panel - Installation.
13. Install the left sill plate.





14. Install the center console (1) Floor Console - Installation.





15. Install the console rear cover (2) or the DVD player (if equipped).










16. Install the rear seat bottom . Service and Repair
17. Reconnect the negative battery cable.
pro multis · About Operation CHARM