Front Fender - Removal

REMOVAL





1. Mark fender location.
2. Remove wheel if necessary.
3. Remove wheel liner Splash Shield - Removal.





4. Remove front fascia as necessary, Front Bumper Fascia - Removal.

Antenna





If required, remove the antenna from the fender.

1. Unscrew the antenna mast (2) from the antenna body.
2. Remove the antenna cap nut (1) using an antenna nut wrench (Special Tool C-4816)
3. Remove the antenna adapter (4) from the top of the fender.
4. Lower the antenna body (3) through the mounting hole in the top of the fender.





5. Remove front lower mounting bolts (2).
6. Loosen rocker panel cover as necessary.
7. Remove the inner support rivet (3).
8. Remove rear lower mounting bolts (4).





9. Remove upper fender mounting bolts (1).
10. Remove fender (2) from vehicle.