Operation CHARM: Car repair manuals for everyone.
Home >> Jeep >> 2010 >> Commander 4WD V6-3.7L >> Repair and Diagnosis >> Steering and Suspension >> Suspension >> Control Arm >> Service and Repair >> Front Lower Control Arm - Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Front Lower Control Arm - Installation






INSTALLATION










1. Position the lower suspension arm into the cradle.
2. Install the rear bolts (2) and flag nuts (3) to secure the lower control arm (1) to the frame, Tighten the bolts (3) to 88 Nm (65 ft lbs).
3. Install the nut and bolt for the front of the lower control arm Tighten to 169 Nm (125 ft lbs).






NOTE: Orientation of the flag bolt is critical Flag and head of the bolt (7) must be installed on the forward side of the lower control arm.

4. Install the lower clevis bolt at the lower control arm and tighten to 169 Nm (125 ft lbs).
5. Install the stabilizer link (6) at the lower control arm and tighten to 115 Nm (85 ft lbs).





6. Install the steering knuckle (3) to the upper ball joint (2) and tighten the nut (4) to 95 Nm (70 ft. lbs.)Front Steering Knuckle - Installation.

7. Install the tire and wheel assembly.
8. Lower the vehicle.
9. Perform wheel alignment Service and Repair.

pro multis · About Operation CHARM