Operation CHARM: Car repair manuals for everyone.
Home >> Jeep >> 2010 >> Commander 4WD V6-3.7L >> Repair and Diagnosis >> Wiper and Washer Systems >> Rain Sensor >> Service and Repair >> Light Rain Sensor Module (LRSM) - Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Light Rain Sensor Module (LRSM) - Installation






INSTALLATION





1. Be certain that the two sliding cam locks (5) extend downward (installation position) from the lower side (the side opposite the connector) of the Rain Sensor Module (RSM) housing (6).
2. Reconnect the overhead wire harness (3) connector to the RSM.
3. Position the RSM over the mounting bracket (1) on the windshield glass (2).
4. Push the RSM housing firmly and evenly against the mounting bracket to seat it, then press the two sliding cam locks upward from the lower side of the housing until they are fully engaged and flush (4) with the top of the housing.
5. Reconnect the battery negative cable.

pro multis · About Operation CHARM