Camshaft Bearing
Camshaft BearingBearing oil clearance
LH, RH camshaft
Intake
No.1 0.020 - 0.057 mm (0.0008 - 0.0022 inch)
No.2, 3, 4 0.030 - 0.067 mm (0.0012 - 0.0026 inch)
Exhaust
No.1 0.020 - 0.057 mm (0.0008 - 0.0022 inch)
No.2, 3, 4 0.030 - 0.067 mm (0.0012 - 0.0026 inch)
Camshaft Bearing Cap
Install camshaft bearing caps (A).
Assemble camshaft bearing caps as the order below.
NOTE: Ensure that the cam bearing caps are installed in the correct location and direction. Refer to the table.
CAUTION: Rotate the crankshaft to position the pistons 10 mm (0.3937 inch) from the top of the cylinder block.