Cylinder Head

Cylinder Head
Install the cylinder head bolts.
Apply a light coat if engine oil on the threads and under the heads of the cylinder head bolts.
Using 8 mm and 10 mm hexagon wrench, install and tighten the 10 cylinder head bolts and plate washers, in several passes, in the sequence shown.
Tightening torque:
M10 22.6 - 26.5 Nm (2.3 - 2.7 kg-m, 16.6 - 19.5 ft. lbs.) + 60° - 65° + 60° - 65°
M12 27.5 - 31.4 Nm (2.8 - 3.2 kg-m, 20.3 - 23.1 ft. lbs.) + 60° - 65° + 60° - 65°