Fluid - M/T: Testing and Inspection

Check Top-Up Oil Level

WARNING: Avoid excessive skin contact with mineral oil. Mineral oils remove the natural fats from the skin, leading to dryness, irritation and dermatitis.

1. Release fixings, remove underbelly panel.
2. Clean area around oil filler/level plug.

Drain And Fill Plug:

3. Remove oil filler/level plug.
4. Check that oil level is to bottom of oil filler/level plug hole.
5. Top-up fluid level (if required) with recommended oil to bottom of filler/level plug hole.
6. Fit manual gearbox filler/level plug and tighten to 30 Nm (22 ft. lbs.)
7. Remove all traces of oil from gearcase.
8. Fit undebelly panel, secure fixings.