Operation CHARM: Car repair manuals for everyone.
Home >> Land Rover >> 2001 >> Discovery II (LT) V8-4.0L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Crankshaft Position Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Crankshaft Position Sensor: Service and Repair


Sensor - Crankshaft Position (CKP)

Service Repair No - 18.30.12

Remove

1. Release fixings and remove battery cover.
2. Disconnect battery earth lead.
3. Raise front of vehicle.

WARNING: Do not work on or under a vehicle supported only by a lack. Always support the vehicle on safety stands.

4. Release fixings and remove underbelly panel.





5. Release CKP sensor multiplug from bracket.
6. Remove 2 bolts securing CKP sensor heat shield and position aside.
7. Remove 2 nuts securing CKP sensor, remove 2 spacers, CKP sensor and sensor mounting.
8. Disconnect CKP sensor multiplug from engine harness.

Refit

1. Ensure all components are clean.
2. Connect CKP sensor multiplug to engine harness.
3. Fit sensor mounting, CKP sensor, 2 spacers and tighten CKP sensor retaining nuts to 6 Nm (5 ft. lbs.).
4. Fit CKP sensor heat shield and secure with bolts.
5. Fit underbelly panel and secure with fixings.
6. Remove stand(s) and lower vehicle.
7. Connect battery earth lead.
8. Fit battery cover and secure the fixings.
9. Reset adaptions using TestBook.
pro multis · About Operation CHARM