Air Flow Meter/Sensor: Service and Repair

Sensor - Mass Air Flow (MAF)

Service Repair No - 19.22.25

Remove





1. Disconnect multiplug from MAF sensor.
2. Loosen clip and release air intake hose from MAF sensor.

NOTE: Pre 03 MY air intake hose illustrated.

3. Release 2 clips and remove MAF sensor from air cleaner, remove and discard 'O' ring.

Refit

1. Fit new MAF sensor 'O' ring, position MAF sensor to air cleaner and secure with clips.

CAUTION: Ensure 'O' ring is not displaced during fitting.

2. Position air intake hose to MAF sensor and secure with clip.
3. Connect multiplug to MAF sensor.