Alternator: Service and Repair

Alternator - V8

Service repair No - 86.10.02

Remove
1. Remove auxiliary drive belt.





2. Remove 2 bolts securing alternator to mounting bracket.
3. Release alternator from mounting bracket.





4. Remove nuts securing alternator cables, and release cables.





5. Remove alternator from mounting bracket.
6. Remove pulley from alternator.

Refit
1. Fit alternator pulley and tighten nut to 80 Nm (59 ft. lbs.).
2. Position alternator to mounting bracket.
3. Connect alternator cables and tighten B+ nut to 18 Nm (13 ft. lbs.), and D+ nut to 5 Nm (3.7 ft. lbs.).
4. Locate alternator in mounting bracket.
5. Fit alternator mounting bolts and tighten to 45 Nm (33 ft. lbs.).
6. Fit auxiliary drive belt.