Idle Speed/Throttle Actuator - Electronic: Service and Repair

Service repair no - 19.22.54

Remove







1. Disconnect IAC valve multiplug.
2. Release and remove 2 clips securing air hoses and release hoses.
3. Remove 2 screws securing IAC valve to inlet manifold.
4. Collect AC valve clamps and remove IAC valve.

Refit
5. Position IAC valve, locate clamps, fit screws and tighten to 8.5 Nm (6 labor. ft).
6. Position air hoses and secure clips.
7. Connect IAC valve multiplug.
8. Connect Testbook to clear any fault codes.