Operation CHARM: Car repair manuals for everyone.
Home >> Land Rover >> 2001 >> Range Rover (LP) V8-4.6L >> Repair and Diagnosis >> Transmission and Drivetrain >> Transfer Case >> Service and Repair >> Procedures >> Transfer Gearbox Overhaul >> Viscous Coupling Unit (VCU). Replacement
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Viscous Coupling Unit (VCU). Replacement

REMOVAL
1. Remove front output shaft drive flange.





2. Remove 6 bolts securing VCU housing to transfer box.
3. With care, break front face RTV seal and remove VCU assembly. Do not carry out further dismantling if component is removed for access only.
4. Press out viscous coupling from housing.

CAUTION: Protect output shaft thread and do not use excessive force when pressing out viscous coupling.

INSTALLATION
1. Clean mating surfaces of viscous coupling housing and transfer box.

CAUTION: Do not use a metal scraper as this may damage sealing surfaces.

2. Clean bearing and VCU mating faces.
3. Press VCU into bearing.
4. Apply a continuous 2 mm bead of sealant to VCU housing mating face. Path to be around inside of bolt holes.
5. Install VCU assembly to transfer box ensuring correct alignment of bolt holes before disturbing RTV bead.
6. Install bolts and progressively tighten to 35 Nm (26 ft. lbs.).
7. Install front output shaft drive flange.
pro multis · About Operation CHARM