Front Wiper Arm

Front Wiper Arm

Service Repair No - 84.15.01 (Pair)
Service Repair No - 84.15.02 (Each)

Remove
1. Remove cover from wiper arm nut.





2. Remove nut securing wiper arm to spindle.
3. Remove wiper arm/blade assembly.
4. If necessary, release clip and remove blade from wiper arm.

Refit
5. If necessary, fit blade to wiper arm.
6. Ensure motor is in "park" position.
7. Position wiper arm/blade assembly. Ensure tip of wiper arm is level with top edge of screen obscuration band.
8. Secure wiper arm with nut. Tighten to 19 Nm (14 ft. lbs.)
9. Lift wiper arm slightly. Remove pin.
10. Fit cover to wiper arm nut.
11. Operate wipers on wet screen to ensure correct setting.