Body Control Module: Service and Repair

Central Control Unit

Service Repair No - 86.55.75

Remove
1. Disconnect battery earth lead.





2. Open drivers glove box lid and remove fuse box cover.





3. Remove bolt securing fuse box mounting plate to steering column bracket.
4. Remove 2 bolts securing mounting plate to body.
5. Remove 2 bolts securing fuse box to mounting plate.
6. Disconnect 3 multiplugs from CCU in rear of fuse box.





7. Manoeuvre fuse box to gain access to CCU.
8. Release retaining clips and remove CCU.

Refit
1. Position CCU and secure in clips.
2. Align fuse box to mounting plate.
3. Connect multiplugs to CCU.
4. Fit bolts securing fuse box to mounting bracket and tighten to 8 Nm (6 ft. lbs.).
5. Position mounting plate and tighten bolts to 8 Nm (6 ft. lbs.).
6. Fit fuse box cover.
7. Close glove box.
8. Connect battery earth lead.