Infotainment Gateway Module

86.53.47 Infotainment Gateway Module

Remove
1. Disconnect battery earth lead.
2. Remove the integrated head unit assembly.





3. Release 2 clips securing infotainment gateway module to fascia.
4. Disconnect infotainment gateway module multiplug. Remove the module.

Do not carry out further dismantling if component is removed for access only.





5. Remove 2 Torx screws and release infotainment gateway module from bracket.

Refit
1. Position module to bracket and secure with Torx screws.
2. Connect multiplug to module.
3. Position module to fascia and secure with clips.
4. Install the integrated head unit.
5. Initiate a new component using TestBook/T4.