Operation CHARM: Car repair manuals for everyone.
Home >> Land Rover >> 2012 >> Range Rover (LM) V8-5.0L SC >> Repair and Diagnosis >> Brakes and Traction Control >> Antilock Brakes / Traction Control Systems >> Wheel Speed Sensor >> Service and Repair >> Rear Wheel Speed Sensor
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Rear Wheel Speed Sensor





Rear Wheel Speed Sensor

Removal

NOTE:
Removal steps in this procedure may contain installation details.
1 Disconnect the battery ground cable.For additional information, refer to Specifications Battery and Charging System
2
WARNING: Make sure to support the vehicle with axle stands.
Raise and support the vehicle.
3 For additional information, refer to Rear Fender Splash Shield Service and Repair




4




5
CAUTION: Before disconnecting or removing the components, ensure the area around the joint faces and connections are clean and dry. Plug open connections to prevent contamination.





6
NOTE:
Left hand shown, right hand similar.





7
CAUTION: Make sure that the component is clean, free of foreign material and lubricant.
CAUTION: Make sure that the mating faces are clean and free of foreign material.
CAUTION: Make sure that the sensor tip is clean and free of foreign material.
NOTE:
Left hand shown, right hand similar.

- TORQUE: 8 Nm

Installation
1 To install, reverse the removal procedure.
2 Configure the anti-lock brake system (ABS) module using the diagnostic tool.

pro multis · About Operation CHARM