Operation CHARM: Car repair manuals for everyone.
Home >> Lexus >> 1999 >> SC 400 V8-4.0L (1UZ-FE) >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Camshaft Position Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Camshaft Position Sensor: Service and Repair







COMPONENTS

REMOVAL





1. REMOVE V-BANK COVER
2. DRAIN ENGINE COOLANT
3. DISCONNECT UPPER RADIATOR HOSE
4. REMOVE NO.3 TIMING BELT COVER
5. DISCONNECT CAMSHAFT POSITION SENSOR CONNECTOR
6. REMOVE CAMSHAFT POSITION SENSOR
Remove the bolt, stud bolt and camshaft position sensor.

INSTALLATION





1. INSTALL CAMSHAFT POSITION SENSOR

Torque: 7.5 N.m (80 kgf.cm, 66 in.lbf)

2. CONNECT CAMSHAFT POSITION SENSOR CONNECTOR
3. INSTALL NO.3 TIMING BELT COVER
4. CONNECT RADIATOR HOSE
5. INSTALL V-BANK COVER
6. FILL ENGINE COOLANT
7. CHECK ENGINE COOLANT FOR LEAKS
8. CHECK IGNITION TIMING
pro multis · About Operation CHARM