Operation CHARM: Car repair manuals for everyone.
Home >> Lexus >> 2003 >> IS 300 L6-3.0L (2JZ-GE) >> Repair and Diagnosis >> Brakes and Traction Control >> Antilock Brakes / Traction Control Systems >> Wheel Speed Sensor >> Service and Repair >> Speed Sensor, Rear
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Speed Sensor, Rear






REMOVAL





1. DISCONNECT SPEED SENSOR CONNECTOR
a. Remove the seat cushion and seatback.
b. Disconnect the speed sensor connector and pull out the sensor wire harness with the grommet.
2. REMOVE REAR WHEEL
Torque: 103 Nm (1,050 kgf-cm, 76 ft. lbs.)
3. REMOVE SPEED SENSOR
a. Remove the clamp bolt holding the sensor wire harness to the toe control link.
Torque: 5.0 Nm (51 kgf-cm, 44 inch lbs.)
b. Remove the clamp nut holding the sensor wire harness to the body.
Torque: 5.0 Nm (51 kgf-cm, 44 inch lbs.)





c. Remove the sensor installation bolt and speed sensor from the axle carder.
Torque: 8.0 Nm (82 kgf-cm, 71 inch lbs.)

INSTALLATION
Installation is in the reverse order of removal.

HINT: After installation, check speed sensor signal.
pro multis · About Operation CHARM