System Inspection

INSPECTION







1. MAP LAMP ASSY
a. Inspect map light assy continuity.
1. Check that the continuity between terminals at each switch position, as shown in the chart.

2. VANITY LAMP ASSY
a. Inspect vanity light continuity.
1. Check that the continuity exists between terminals 1 and 2, when light is operated.

Standard:
OFF (closed): No continuity
ON (opened): Continuity

3. GLOVE BOX LAMP SWITCH
a. Inspect glove box switch continuity.
1. Check that the continuity exists between terminals 1 and 2, when switch is operated.

Standard:
ON (when shaft is pressed): No continuity
OFF (when shaft is not pressed): Continuity

4. GLOVE BOX LAMP ASSY
a. Check that the continuity exists between terminal.
Standard: Continuity exists

5. RETAINER FRONT DOOR SCUFF PLATE
a. Check that the continuity exists between terminal.
Standard: Continuity exists