Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Right Side

REPLACEMENT
1. OBSERVE AIR BAG SYSTEMS SERVICE PRECAUTIONS
2. SEPARATE BATTERY NEGATIVE TERMINAL
3. REMOVE ENGINE UNDER COVER NO.1

4. REMOVE AIR BAG FRONT RH SENSOR




a. Remove the bolt and front airbag sensor RH.




b. Disconnect the connector from the front airbag sensor RH.

HINT: Insert a screw driver in any of the three opening sections of the sensor and slide the sensor to disconnect it from the connector.

5. INSPECT AIR BAG FRONT RH SENSOR

6. INSTALL AIR BAG FRONT RH SENSOR
a. Check that the ignition switch turn OFF.
b. Check that the battery negative terminal is disconnected.

NOTE: Do not start the operation for 90 seconds after removing the terminal.

c. Install the front airbag sensor RH with the bolt.

Torque: 17.5 N.m (178 kgf.cm, 13 ft.lbf)

d. Connect the connector to the front airbag sensor RH.
e. Check that no play is identified.

7. INSPECT SRS WARNING LIGHT
Refer to Air Bag Systems; Testing and Inspection.