Operation CHARM: Car repair manuals for everyone.
Home >> Lexus >> 2004 >> GS 430 V8-4.3L (3UZ-FE) >> Repair and Diagnosis >> Brakes and Traction Control >> Antilock Brakes / Traction Control Systems >> Testing and Inspection >> Component Tests and General Diagnostics >> ABS W/BA & VSC System >> Component Tests >> Check VSC Sensor Signal
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Check VSC Sensor Signal

CHECK VSC SENSOR SIGNAL

In case of using LEXUS hand-held tester:

NOTE:
When having replaced the yaw rate sensor, deceleration sensor and/or ECU, perform zero point calibration of the yaw rate and deceleration sensors (See step 7.). Make sure that this operation should be done before starting the following.




a. Hook up the LEXUS hand-held tester to the DLC3.
b. Do steps (a)-(2) and from (a)-(4) to (c).
c. Read the DTC by following the prompts on the tester screen.

HINT: Please refer to the LEXUS hand-held tester operator's manual for further details.

C0371/71 - C1208/72:




DTC of the VSC sensor check function:
pro multis · About Operation CHARM