Component Inspection

BLOWER MOTOR

INSPECTION




1. REMOVE BLOWER MOTOR
a. Remove the wire harness clamp and disconnect the connector.
b. Remove the 3 screws and blower motor.




2. INSPECT BLOWER MOTOR OPERATION
Connect the positive (+) lead from the battery to terminal 2 and negative (-) lead to terminal 1, then check that the motor operations smoothly.
If operation is not as specified, replace the blower motor.




3. INSTALL BLOWER MOTOR
a. Install the blower motor with the 3 screws.
b. Connect the connector and wire harness clamp.