Compressor Clutch Relay: Testing and Inspection

MAGNETIC CLUTCH RELAY

INSPECTION

HINT:
The magnetic clutch relay is built in the engine room junction block. Since the relay is constructed with a relay block that is in the junction block as a unit, it is impossible to disconnect the wire harness connecting with the relay block.

If the relay has a malfunction, replace it with the junction block assembly wireharness together.




1. REMOVE ENGINE ROOM J/B







2. INSPECT MAGNETIC CLUTCH RELAY CONTINUITY
If continuity is not as specified, replace the engine room J/B.

3. INSTALL ENGINE ROOM J/B