Initialization

RESET (INITIALIZE)

a. Resetting the power back door system:
The power back door ECU records the fully open position and the fully closed position of the power back door in its memory and the power back door fully opens and fully closes based on this memory. In the case where any of the batteries, fuses, power back door ECU or power back door drive unit are removed and then reinstalled, the power back door ECU loses the memory of the door positions. In such cases, resetting the system is necessary. However operation of the back door closer system has no effect on ECU memory.

Reset the power back door system as follows:
1. Fully close the back door.
2. Activate the transmitter switch or power back door opener/closer switch to open the power back door.
3. Check that the drive unit for the power back door stops operating at a predetermined position and that the damper stay allows the back door to move to the fully open position from the position where the drive unit stops. The power back door ECU records the fully open position at this time and the system has been reset.