Operation CHARM: Car repair manuals for everyone.
Home >> Lexus >> 2004 >> RX 330 AWD V6-3.3L (3MZ-FE) >> Repair and Diagnosis >> Restraints and Safety Systems >> Air Bag Systems >> Impact Sensor >> Service and Repair >> Airbag Sensor Front >> Replacement
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Replacement

REPLACEMENT

HINT: Replacement procedure of the RH side is the same as that for the LH side.

1. PRECAUTION
2. DISCONNECT BATTERY NEGATIVE TERMINAL
3. REMOVE LH HEADLAMP ASSY




4. REMOVE AIR BAG SENSOR FRONT LH
a. Remove the 2 bolts and the airbag sensor front LH.
b. Disconnect the connector from the airbag sensor front LH.

5. INSTALL AIR BAG SENSOR FRONT LH
a. Check that the ignition switch is off.
b. Check that the battery negative (-) terminal is disconnected.

NOTE: Do not start the operation for 90 seconds after removing the terminal.

c. Install the airbag sensor front LH with the 2 bolts.

Torque: 9.0 Nm (92 kgf.cm, 80 in.lbf)

NOTE:
- If the airbag sensor front LH has been dropped, or there are any cracks, dents or other defects in the case, bracket or connector, replace the airbag sensor front LH with a new one.
- When installing the airbag sensor front LH, take care that the SRS wiring does not interfere with other parts and is not pinched between other parts.

d. Connect the connector of the airbag sensor front LH.
e. Check that no play is identified.

6. INSTALL LH HEADLAMP ASSY
7. HEADLIGHT AIM ONLY
8. INSPECT SRS WARNING LIGHT
pro multis · About Operation CHARM