Reverse Signal Circuit

REVERSE SIGNAL CIRCUIT

CIRCUIT DESCRIPTION

This circuit sends the Park/Neutral Position switch signal (Reverse or other) to the Body ECU (Sub). If this signal cannot be received, Body ECU (Sub) does not perform reverse linked function control (wiper system).

HINT: Refer to the Automatic Transmission section for the PNP switch check.

Wiring Diagram:

Step 1 - 2:

INSPECTION PROCEDURE

HINT: In case of using the hand-held tester, start the inspection from step 1 and in case of not using the hand-held tester, start from step 2.