Freeze Frame Data
FREEZE FRAME DATA OF ABSHINT:
- When a DTC is detected or the ABS operates, the skid control ECU stores the current vehicle (sensor) state as freeze frame data.
- The skid control ECU stores the number of times (maximum: 31.the ignition switch has been turned from OFF to ON since the last time the ABS was activated.However, if the vehicle is stopped, the vehicle is driven at 7 km/h (4.3 mph) or less, or a DTC is detected, the ECU will not count the next time the ignition switch is turned from OFF to ON.
- Freeze frame data at the time the ABS operates: The skid control ECU stores and updates data when the ABS operates. When the ECU stores data at the time a DTC is detected, the data stored when the ABS operated is erased.
- Freeze frame data at the time a DTC is detected:
When the ECU stores data at the time a DTC is detected, the data will not be updated until the data is cleared.
a. Connect the hand-held tester to the DLC3.
b. Turn the ignition switch ON.
c. From the display on the tester, select the Freeze Frame Data.