Transmission Speed Sensor: Service and Repair

REPLACEMENT





1. REMOVE O/D DIRECT CLUTCH SPEED SENSOR
a. Disconnect the sensor connector.
b. Remove the bolt and sensor.
c. Remove the O-ring from the sensor.





2. REMOVE VEHICLE SPEED SENSOR
a. Disconnect the sensor connector.
b. Remove the bolt and sensor.
c. Remove the O-ring from the sensor.





3. INSTALL VEHICLE SPEED SENSOR
a. Coat a new O-ring with ATF and install it to the sensor.
b. Install the sensor with the bolt.
Torque: 5.4 Nm (55 kgf-cm, 48 inch lbs.)
c. Connect the sensor connector.





4. INSTALL O/D DIRECT CLUTCH SPEED SENSOR
a. Coat a new O-ring with ATF and install it to the sensor.
b. Install the sensor with the bolt.
Torque: 5.4 Nm (55 kgf-cm, 48 inch lbs.)
c. Connect the sensor connector.