Security Lamp/Indicator: Testing and Inspection

THEFT DETERRENT: SECURITY INDICATOR LIGHT ASSEMBLY:

INSPECTION





1. INSPECT OUTER MIRROR SWITCH ASSEMBLY (for Security Indicator)
(a) Apply battery voltage between the terminals of the indicator, and check the lighting condition of the security indicator.
NOTICE:
- If the positive (+) lead and the negative (-) lead are incorrectly connected, the security indicator does not illuminate.
- A voltage of more than 12 V will damage the security indicator.
- If the voltage is too low, the security indicator will not illuminate.

OK:





- If the result is not as specified, replace the switch assembly.