Crankshaft, Engine
CRANKSHAFTStandard thrust clearance: 0.020 to 0.220 mm (0.0008 to 0.0087 in.)
Maximum thrust clearance: 0.30 mm (0.0118 in.)
Thrust washer thickness: 2.440 to 2.490 mm (0.0961 to 0.0980 in.)
Bearing inside diameter: 66.986 to 67.000 mm (2.6372 to 2.6378 in.)
Standard clearance:
No. 1 and No. 5: 0.017 to 0.033 mm (0.0007 to 0.0013 in.)
Others: 0.029 to 0.045 mm (0.0011 to 0.0018 in.)
Maximum clearance:
No. 1 and No. 5: 0.043 mm (0.0017 in.)
Others: 0.055 mm (0.0022 in.)
Maximum circle runout: 0.08 mm (0.0031 in.)
Main journal diameter: 66.988 to 67.000 mm (2.6373 to 2.6378 in.)
Crank pin diameter: 51.982 to 52.000 mm (2.0465 to 2.0472 in.)
Maximum taper and out of round: 0.02 mm (0.0008 in.)