Installation

DOOR LOCK: ENTRY LOCK AND UNLOCK SWITCH (for Front): INSTALLATION

INSTALLATION
HINT:
- Use the same procedures for the LH side and RH side.
- The procedures listed below are for the LH side.

1. INSTALL FRONT OUTSIDE DOOR HANDLE ASSEMBLY LH [1][2]Installation
2. INSTALL FRONT DOOR OUTSIDE HANDLE COVER LH [1][2]Installation
3. INSTALL FRONT DOOR GLASS SUB-ASSEMBLY LH [1][2]Installation
4. INSTALL FRONT INNER DOOR GLASS WEATHERSTRIP LH [1][2]Installation
5. INSTALL FRONT DOOR SERVICE HOLE COVER LH [1][2]Installation
6. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH [1][2]Installation
7. INSTALL MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY [1][2]Installation
8. INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG LH [1][2]Installation
9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
10. INSTALL COWL TOP VENTILATOR LOUVER RH Installation
11. PERFORM INITIALIZATION
(a) Perform initialization Repair Instruction - Initialization.
NOTE:
Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.