Air Flow Meter/Sensor: Service and Repair
REMOVAL1. Disconnect the battery ground cable.
CAUTION: Always disconnect the battery ground cable prior to work on the electronic engine controls or damage to the electronic component may occur.
2. Disconnect the Mass Air Flow (MAF) Sensor connector.
CAUTION: Do not tamper with the MAF sensing elements located in the airflow bypass. Tampering may result in unit failure.
NOTE: The MAF sensor module and body are calibrated and replaced as a unit.
3. Loosen the clamp and remove the air cleaner outlet tube.
4. Remove the MAF sensor.
^ Remove the four bolts.
^ Remove the MAF sensor.
INSTALLATION
1. To install, reverse the removal procedure.