System Specifications

MERCON(R) automatic Transmission Fluid is being replaced by MERCON(R) V as a service fluid, as per TSB 06-14-4.

1 Actual quantities will vary a few ounces based on applications. Always use the fluid level indicator for setting the proper level.

Note: Always use the fluid level indicator to check and set the proper level of transmission fluid.

The above fluid capacities are approximate dry fill capacity and include fluid coolers and fluid cooler tubes. The fluid level indicator should be used to determine actual fluid requirement and fluid specifications. Check level at operating temperature. DO NOT OVERFILL.
The transmission fluid should be changed every 30,000 miles (48,000 km) regardless of normal or special operating conditions.