Alarm System Transponder: Service and Repair

REMOVAL
1. Disconnect the battery ground cable.

CAUTION: Electronic modules are sensitive to electrical charges. If exposed to these charges, damage may result.

2. Remove the instrument panel cluster finish panel.







3. Position the Passive Anti-theft System (PATS) transceiver module aside.
1 Push the tab and remove the ignition lock cylinder.

NOTE: The ignition must be turned to the RUN position to remove ignition lock cylinder.

2 Remove the screw.
3 Position the PATS transceiver module aside.







4. Remove the PATS transceiver module.
1 Disconnect the electrical connector.
2 Remove the PATS transceiver module.

INSTALLATION
1. To install, reverse the removal procedure.