Operation CHARM: Car repair manuals for everyone.
Home >> Lincoln >> 2002 >> LS V8-3.9L VIN A >> Repair and Diagnosis >> Powertrain Management >> Ignition System >> Camshaft Position Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Camshaft Position Sensor: Service and Repair

REMOVAL
1. Disconnect the battery ground cable.
2. Remove the wiper motor.







3. Remove the harness bracket nut and stud from the rear of the LH cylinder head.







4. Remove the harness bracket nut and position the bracket away from the cylinder head.







5. Remove the Camshaft Position (CMP) sensor.
1 Disconnect the electrical connector.
2 Remove the bolt.
3 Remove the CMP sensor.

INSTALLATION
1. To install, reverse the removal procedure.

CAUTION: Do not overtighten the screw or damage to the camshaft position sensor may occur.

NOTE: When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive strategy. The vehicle may need to be driven 16 km (10 miles) or more to relearn the strategy.
pro multis · About Operation CHARM