Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Engine Controls - PCM Reprogramming Precautions

Bulletin No: 01-019/09

Last Issued: 05/29/2009

Subject:
SERVICE CAUTIONS FOR PCM REPROGRAMMING

APPLICABLE MODEL(S)/VINS
2009 Mazda6 3.7L vehicles with produced before Oct. 17, 2008

DESCRIPTION





Due to a purge solenoid valve logic change, the PCM software has been modified and a diode (A) has been added to the harness.





When performing a PCM reprogramming on a vehicle built before Oct. 17, 2008 (without a diode), the (example only shown) screen may appear in the Mazda Modular Diagnostic System (M-MDS).

Install a short cord (diode) to the harness according to Service Bulletin 01-018/09 (Purge Valve Contact / Hard Rattle Noise) issued 05/29/09, then reprogram the PCM.

CAUTION:
Failure to install a short cord (diode) will cause a functional concern. It is the dealer's responsibility to follow the service bulletin and M-MDS instructions.





Disclaimer